The use of UV germicidal lamp in ballast water on the ship is a systematic and complicated process, the aim is to kill microorganisms in ballast water through UV irradiation,to meet the requirements of the International Maritime Organization (IMO) and other relevant regulations on ballast water discharge.Here are the detailed steps and precautions for using UV germicidal lamps in ballast water on ship:
First, system design and installation
1.System selection: According to the capacity of ballast water, water quality characteristics and IMO standards, the appropriate UV sterilization system is selected. The system usually includes ultraviolet disinfection unit, filter, control system and other parts.
2.installation site:Install the UV sterilization system on the ballast water discharge pipe, make sure the water flow can pass through the UV disinfection unit. The installation site should be considered for easy maintenance and repair.
Second, Operation process
1.Pretreatment: Before ultraviolet disinfection, it is usually necessary to pretreat the ballast water, such as filtration, oil removal, etc., to remove suspended matter、 grease and other impurities in the water,and improve the effect of ultraviolet sterilization.
2.Star system: Start the UV sterilization system according to the operating procedures, including opening the UV lamp, adjusting the water speed, etc. Ensure that all components of the system work properly without abnormal sound or water leakage.
3.Monitoring and adjustment:During the sterilization process,the ultraviolet light intensity, water temperature, and water flow rate should be monitored in real time , make sure the sterilization effect meets the requirements. If the parameters are abnormal, adjust them in time or shut down for check.
4.Discharge treated water:Ballast water after ultraviolet sterilization treatment,it can be discharged only after meeting the relevant discharge standard.
Third, important notes
1.Safe operation:The UV germicidal lamp will produce strong ultraviolet radiation during operation,harmful to human skin and eyes.Therefore, protective clothing, gloves and goggles should be worn during operation to avoid direct exposure to ultraviolet radiation.
2.Regular maintenance:The UV sterilization system needs regular maintenance and maintenance, including cleaning the lamp tube , replacing the filter, checking the electrical circuit, etc. Ensure that the system always in good working condition, to improve the sterilization effect and operation reliability.
3.Environment adaptability: Ships will encounter various complex environmental conditions during navigation, such as sea waves, temperature changes and so on. Therefore, the UV sterilization system should have good environmental adaptability can be able to work normally under various condition.
(Amalgam UV Lamps)
Fourth,Technical characteristics and advantages
● highly effective disinfection UV germicidal lamps can quickly and effectively kill microorganisms in ballast water, including bacteria, viruses, etc
● No secondary pollution No chemical agents are added during the Ultraviolet disinfection process, will not produce harmful substances, no secondary pollution to water and the surrounding environment.
● Intelligent control Now the UV sterilization system usually equipped with intelligent control system , can monitor and adjust operating parameters in real time to ensure the best sterilization effect.
In summary , the use of UV germicidal lamps in ship ballast water is a strict and meticulous process, operations and maintenance must be carried out strictly according to operating procedures.Through reasonable system design and scientific operation process, ensure that the UV sterilization system plays a maximum role in the ship's ballast water treatment.
The above contents refer to the following online materials:
1.Application technology of UV sterilizer for treating ship ballast water filtration.
2.UVC sterilization and disinfection common problems
3.(Extreme Wisdom Classroom) Wang Tao: Application of ultraviolet disinfection in future daily life.
4. Ship ballast water treatment system ultraviolet medium pressure mercury lamp 3kw 6kw UVC sewage treatment UV lamp.
Post time: Aug-30-2024